Do you want to grow your own magic mushrooms? Then, make sure to begin your next grow with clean, dependable spores. Magic Mushroom Spore Syringes are available at USA Magic Mushroom Grow Kits in a range of clean, sealed, and easy-to-use spore syringes. All of our buy magic mushroom spore syringes are packed and produced in a sterile laboratory environment, so you can be confident that your upcoming harvest will be excellent. Browse our full assortment of spore syringes below and get yours today to take advantage of our quick, low-cost, and discreet delivery service.
When growing magic mushrooms at home, you will eventually need to inoculate something. You’ll need to add spores to your agar, sugar solution, or PF tek cake at some stage. A syringe is frequently the ideal tool for the job. We sell a variety of high-quality magic mushroom spore syringes here at USA Magic Mushroom Grow Kits.
A spore syringe is a magical mushroom spore print that has been pre-loaded into a solution within a syringe. The spores are activated by being in this solution and can be used immediately for inoculation or stored in the refrigerator.
If you’re growing magic mushrooms from scratch, you’ll almost certainly need to utilize a spore syringe for inoculation at some time. You run the danger of contaminating the spores and damaging the grow before it even starts if you produce them yourself. Because our spore syringes are completely sterile, your grow may get started to a clean and healthy start.
There are numerous reasons to purchase USA Magic Mushroom Grow Kits magic mushroom spore injections. Our spore prints are not only sterile, but they also contain the best grade magic mushroom spores, ensuring that you receive the highest quality magic mushrooms. We ship quickly and discreetly, and we provide excellent customer care if anything goes wrong with your order.
The finest site to buy magic mushroom spore syringes is USA Magic Mushroom Grow Kits. We have years of experience and can offer you the greatest items available. Our products are clean, high quality, and trustworthy. Shop with USA Magic Mushroom Grow Kitsto start your magical mushroom cultivation experience!
There are two methods for inoculating a substrate to develop magic mushrooms. When starting off, it can be difficult to pick which method is ideal, from phantom liquid cultures to Petri dishes. One of the simplest and cleanest methods is to use a spore syringe—the ideal answer for the inexperienced grower!
Growing your own magic mushrooms is an extremely gratifying experience. It is also a lengthy process with multiple steps that must be completed carefully and precisely. The initial step is to inoculate the substrate, which is followed by the germination of your mushroom spores. The cautious, hands-on procedures required for first-time growers can be both intimidating and exciting. But don’t worry, we’re here to help; let’s look at how to construct your first magic mushroom spore syringe.
A spore syringe is required for producing your own magic mushrooms because it is used to inoculate your selected substrate. The little spores floating around in the spore solution contain the genetic code for the ounces and ounces of magical mushrooms you can anticipate to produce. One of the most effective and simple mushroom germination strategies is to mix your spores into sterile water inside a syringe.
Using a spore syringe is the simplest way to keep your mushroom grow clean, especially when combined with a flow hood. Other techniques of inoculation, such as liquid cultures, will be discussed later. In general, a spore syringe permits spores to be delivered directly to the substrate without the possibility of contamination (when done correctly). This strategy is difficult to beat if you’re a first-time grower. It’s a simple and dependable method for the inexperienced. Indeed, many experienced cultivators continue to use this strategy.
To build a spore syringe, you must first obtain some magic mushroom spores. These can be obtained online as spore prints or as ready-made spore syringes. Prepare a clean atmosphere with as little airflow as possible to reduce the chance of infection. This should be done in a still air box or with a laminar flow hood. Alternatively, use a small area with bleachable surfaces first. Consider wearing gloves as well as a mask.
However, keep in mind that this stage does not provide the greatest risk of contamination, so there is no need to overdo it. However, any extra precautions you take will pay off, as cultivating mushrooms is a lengthy and complicated process, and there’s nothing worse than discovering a cake coated in mould two months later!
All of the items listed below should be easily available, either online or in a store. Furthermore, it can be a relatively inexpensive setup, with the benefits significantly outweighing the costs. Aside from the spores, none of it is questionable or under control. Fortunately, spore prints from psilocybin mushrooms are not banned in most countries.
1. Begin by sterilizing your shot glass/small dish and water. Heat in your pressure cooker until it reaches 15psi. Reduce the temperature and continue to cook for at least 30 minutes after reaching pressure. This amount of time will provide proper sterilizing (if reusing syringes, add them at this point as well).
2.
After 30 minutes, turn off the heat and let the water to cool to room temperature. This stage is critical; if you proceed while the water is still hot, you risk destroying the spores. Your equipment can be as sterile as you want, but unless you cook the spores, it’s all for naught.
It should take a few hours to cool entirely, but it’s best to leave it overnight. Make care to keep it closed! If you open it before using the device, it will get infected again.
3. Now you are ready to make the spore syringes. Sterilise your tweezers and scalpel using a flame.
4. Remove the shot glass/small dish from the pressure cooker.
5. With your tweezers, take the spore print from its storage and hold it over the opening of the shot glass/small dish.
6. With scalpel in hand, carefully scrape some of the spores into the water.
7. Fill your syringes immediately—dunk the tip of your first syringe into the water and fill it up. It’s a good idea to empty the syringe into the shot glass and repeat the process a few times. This will ensure that the spores are evenly distributed throughout the water; repeat every time you add more spores.
8. After you’ve filled the syringe, leave it at room temperature for 2-3 days to allow the spores to fully hydrate.
9. Once hydrated, store your spore syringes in the fridge in an airtight ziplock bag. They will be viable for up to a year.
As long as you use caution, using a spore syringe is fairly straightforward. Because each syringe contains millions of spores, you shouldn’t require more than 3 millilitres per square litre of substrate. That’s only a few drops. If you’re inoculating a substrate in a jar, the lid will very certainly have holes punched through it, which will be sealed with tape or a plug of some kind. In every instance, the procedure is the same. Squeeze a small amount of the spore solution onto the substrate after piercing the microporous tape that should be covering these holes (or removing the plug). The amount is determined by the size of the jars.
After that, cover the punctured strips with new microporous tape and store the jars somewhere warm and dark. Within a week, you should notice mycelium colonizing the areas where you dropped the spore solution. It should resemble little patches of cotton wool. These patches should expand to encircle the entire jar over the next few weeks. Do nothing with it until it is completely colonized! Similarly, monitor what else is growing in there to determine whether it has been poisoned.
According to some sources, spore syringes can be stored properly for up to 12 months. Because the spores are live entities, insufficient storage will kill them.
Yes. Spore syringes should always be stored in a refrigerator between 2°C and 8°C. They should also be stored in the dark, however this should not be a problem because they will be kept in a refrigerator.
No. Spores are cells that contain water. Therefore, freezing will destroy them.
Yes. They can die if they are not properly stored. Similarly, they will die gradually with time, though they are amazingly hardy little things when properly stored.
Absolutely. There is no reason why a syringe cannot be used multiple times as long as it has been adequately sterilised and is not damaged. Fill a syringe with sterile boiling water or heat it in a pressure cooker to sterilize it. Use a flame to sterilize the needle.
Another typical method for inoculating substrates with mushroom spores is liquid cultures. Germination occurs essentially within a liquid substrate, with the mycelium suspended ethereally. Liquid cultures take place in a nutrient-rich “broth” (sterile sugar-enhanced water). Most people believe that it is critical to isolate a single strain in liquid cultures; otherwise, uniformity and control would be lost, and the strains will compete with one another. In contrast, spore syringes can be single or multispore.
Another way for germination is in an agar solution in a Petri dish. Agar is a sugar-rich substance in which spores and mycelium can germinate and develop. It is also a simple procedure, as spores from a spore print can be dropped straight onto it.
However, if it is not done in a sealed air box or under a flow hood, the Petri dish will be exposed, allowing numerous other bacteria onto its surface. Mycelium prefers to flourish in the same habitat as many other organisms!
Which method you use is a matter of personal preference and convenience. Spore syringes are the easiest method and are recommended for first-time growers. It’s only a simple method because of its simplicity and speed. However, germination within the substrate takes longer than in a liquid culture.
While liquid cultures are more harder to create, they produce superior outcomes. Because germination has already occurred and mycelium has formed, it colonizes the substrate much faster and more aggressively than the spore syringe method. This means that you reduce the possibility of contamination because the mycelium has a higher probability of dominating. Because spore syringes colonize more slowly, there is a larger window for competitive growth.
Online, spore syringes and liquid cultures are both available. However, it is critical to evaluate the credibility of the sources as well as the legislation in your nation. The mycelium of magic mushrooms is prohibited in several countries, even if the spores are not.
However, if you want to progress, you should experiment with all approaches. When you harvest your first large flushes a few months later, you’ll remember the earliest steps fondly. You’ll also know how to generate new ones right away from your own spores!